Filter
Top Products
set security acl 553
By ICMP packets
Syntax —
set security acl ip acl-name {permit [cos cos] |
deny} icmp {source-ip-addr mask destination-ip-addr mask [type
icmp-type] [code icmp-code] [precedence precedence ] [tos tos]
[before editbuffer-index | modify editbuffer-index] [hits]
By TCP packets
Syntax —
set security acl ip acl-name {permit [cos cos] |deny}
tcp
{source-ip-addr mask [operator port [port2]]
destination-ip-addr mask [operator port [port2]]} [precedence
precedence] [tos tos] [established] [before editbuffer-index |
modify
editbuffer-index] [hits]
By UDP packets
Syntax — set security acl ip acl-name {permit [cos cos] | deny}
udp
{source-ip-addr mask [operator port [port2]]
destination-ip-addr mask [operator port [port2]]} [precedence
precedence] [tos tos] [before editbuffer-index | modify
editbuffer-index] [hits]
acl-name — Security ACL name. ACL names must be unique within
the WX switch, must start with a letter, and are case-insensitive.
Specify an ACL name of up to 32 of the following characters:
Letters a through z and A through Z
Numbers 0 through 9
Hyphen (-), underscore (_), and period (.)
3Com recommends that you do not use the same name with different
capitalizations for ACLs. For example, do not configure two separate
ACLs with the names acl_123 and ACL_123.
In an ACL name, do not include the term all, default-action, map,
help, or editbuffer.
permit — Allows traffic that matches the conditions in the ACE.
cos cos — For permitted packets, a class-of-service (CoS) level for
packet handling. Specify a value from 0 through 7:
1 or 2—Background. Packets are queued in MAP forwarding
queue 4.