Filter
Top Products
display snoop map 707
Examples — The following command shows the snoop filters configured
in the examples above:
WX1200# display snoop info
snoop1:
observer 10.10.30.2 snap-length 100
all packets
snoop2:
observer 10.10.30.3 snap-length 100
frame-type eq data
mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)
See Also
clear snoop on page 700
set snoop on page 701
display snoop map Shows the MAP radios that are mapped to a specific snoop filter.
Syntax — display snoop map filter-name
filter-name — Name of the snoop filter.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — To display the mappings for all snoop filters, use the display
snoop command.
Examples — The following command shows the mapping for snoop
filter snoop1:
WX1200# display snoop map snoop1
filter 'snoop1' mapping
ap: 3 Radio: 2
See Also
clear snoop map on page 700
display snoop on page 706
set snoop map on page 704