Filter
Top Products
set ap boot-configuration vlan 375
WX1200# set ap 1 boot- configuration switch switch-ip
172.16.0.21 mode enable
success: change accepted.
The following command configures Distributed MAP 1 to use the WX
with the name wxr2 as its boot device. The DNS server at 172.16.0.1 is
used to resolve the name of the WX switch.
WX4400# set ap 1 boot-configuration switch name wxr2 dns
172.16.0.1 mode enable
success: change accepted.
See Also
clear ap boot-configuration on page 310
display ap boot-configuration on page 342
set ap boot- configuration ip on page 369
set ap boot-configuration vlan on page 375
set ap
boot-configuration
vlan
Specifies 802.1Q VLAN tagging information for a Distributed MAP.
Syntax — set ap ap-number boot-configuration vlan vlan-tag
tag-value [mode {enable | disable}]
Syntax — set ap ap-number boot-configuration vlan mode
{enable | disable}
ap ap-number — Index value that indentifies the MAP on the WX.
vlan-tag tag-value — The VLAN tag value. You can specify a
number from 1 – 4095.
mode {enable | disable} — Enables or disables use of the specified
VLAN tag on the Distributed MAP.
Defaults — None.
Examples — Enabled.
History —Introduced in MSS 4.2. Version 6.0 removed the dap option.