Filter
Top Products
114 CHAPTER 5: VLAN COMMANDS
See Also
display roaming vlan on page 115
State State of the session:
Setup — Station is attempting to roam to this WX switch.
This switch has asked the WX from which the station is
roaming for the station’s session information and is waiting
for a reply.
Up — MSS has established a tunnel between the WX switches
and the station has successfully roamed to this WX over the
tunnel.
Chck — This WX switch is in the process of accepting a
reassociation request from the roaming peer WX switch for a
station currently roaming to the peer switch.
TChck — This WX switch is in the process of accepting a
reassociation request from the roaming peer WX switch for a
station currently roaming to this switch.
WInd — This WX switch is waiting for network congestion to
clear before sending the roaming indication to the roaming
peer WX switch.
WResp — This WX switch is waiting for network congestion
to clear before sending the roaming response to the roaming
peer WX switch.
Table 21 Output for display roaming station (continued)
Field Description