Filter
Top Products
464 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
set service-profile
soda success-page
Specifies a page on the WX that loads when a client passes the security
checks performed by the SODA agent.
Syntax —
set service-profile name soda success-page page
name — Service profile name.
page — Page that is loaded if the client passes the security checks
performed by the SODA agent.
Defaults — By default, the WX switch generates a page indicating that
the client passed the SODA agent checks.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — Use this command to specify a custom page loaded by the
client when it passes the checks performed by the SODA agent. After this
page is loaded, the client is placed in its assigned VLAN and granted
access to the network.
The page is assumed to reside in the root directory on the WX. You can
optionally specify a different directory where the page resides.
This functionality occurs only when the enforce checks option is enabled
for the service profile. The enforce checks option is enabled by default.
Examples — The following command specifies success.html, which
resides in the root directory on the WX, as the page to load when a client
passes the SODA agent checks:
WX4400# set service-profile sp1 soda success-page
success.html
success: change accepted.
The following command specifies success.html, which resides in the
soda-files directory on the WX switch, as the page to load when a client
passes the SODA agent checks:
WX4400# set service-profile sp1 soda success-page
soda-files/success.html
success: change accepted.