Filter
Top Products
set service-profile ssid-name 465
See Also
display service-profile on page 353
set service-profile soda enforce-checks on page 458
set service-profile soda mode on page 462
set service-profile
ssid-name
Configures the SSID name in a service profile.
Syntax —
set service-profile name ssid-name ssid-name
name — Service profile name.
ssid-name — Name of up to 32 alphanumeric characters. You can
include blank spaces in the name, if you delimit the name with single
or double quotation marks. You must use the same type of quotation
mark (either single or double) on both ends of the string.
Defaults — The default SSID name is private.
Access — Enabled.
History —Introduced in MSS Version 3.0. Support added for blank
spaces in the SSID name in MSS Version 4.0.
Examples — The following command applies the name guest to the
SSID managed by service profile clear_wlan:
WX4400# set service-profile clear_wlan ssid-name guest
success: change accepted.
See Also
display service-profile on page 353
set service-profile ssid-type on page 466