Filter
Top Products
set vlan profile 127
set vlan profile Configures entries in a VLAN profile that can be applied to an MAP for
local switching.
Syntax — set vlan-profile profile-name vlan vlan-name [tag
tag-value]
profile-name — VLAN profile name.
vlan-name — Name of a VLAN.
tag-value — Optional tag value associated with the VLAN. When this
value is set, it is used as the 802.1Q tag for the VLAN.
Defaults — If local switching is enabled on a MAP, but no VLAN profile
is
configured, then a default VLAN profile is used. The default VLAN
profile
includes a single VLAN named default that is not tagged.
Access — Enabled.
History — Introduced in MSS Version 6.0.
Usage — A VLAN profile consists of a list of VLANs and tags. When a
VLAN
profile is applied to a MAP, traffic for the VLANs specified in the
VLAN profile is locally switched by the MAP instead of being tunneled
back to an WX switch.
You enter a separate set vlan-profile command for each VLAN you want
to add to the VLAN profile. A VLAN profile can contain up to 128 entries.
Examples — The following command adds an entry for VLAN red to
VLAN profile locals:
WX# set vlan-profile locals vlan red
success: change accepted.
See Also
display fdb on page 109
display vlan-profile on page 120
clear vlan-profile on page 108