Filter
Top Products
display arp 147
Examples — To return the WX real-time clock to UTC, type the following
command:
WX4400# clear timezone
success: change accepted.
See Also
clear summertime on page 145
set summertime on page 202
set timedate on page 204
set timezone on page 205
display summertime on page 164
display timedate on page 165
display timezone on page 165
display arp Shows the ARP table.
Syntax — display arp [ip-addr]
ip-addr — IP address.
Defaults — If you do not specify an IP address, the entire ARP table is
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays ARP entries:
WX4400# display arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED