Filter
Top Products
set service-profile web-portal-logout logout-url 475
set service-profile
web-portal-logout
logout-url
Specifies the URL that is requested when the user clicks the button to
terminate his or her session in the Mobility Domain.
Syntax —
set service-profile profile-name web-portal-logout
logout-url url
name — Service profile name.
url — Specifies the URL for the Web Portal logout feature. The URL
should be of the form https://host/logout.html.
Defaults — By default, the logout URL uses the IP address of the WX as
the
host part of the URL. The host can be either an IP address or a
hostname.
Access — Enabled.
History — Introduced in MSS Version 6.0.
Usage — Specifying the URL for the Web Portal logout feature is useful
if you
want to standardize the URL across your network. For example,
you can configure the logout URL on all of the WX switches in the
Mobility Domain as wifizone.3Com.com/logout.html, where
wifizone.3Com.com resolves to one of the WX switches in the Mobility
Domain, ideally the seed.
To log out of the network, the user can click the “End Session” button in
the pop-under window, or request the logout URL directly.
Standardizing the logout URL serves as a backup means for the user to
log out in case the pop-under window is closed inadvertently. Note that if
a user requests the logout URL, he or she must enter a username and
password in order to identify the session on the WX. (This is not necessary
when the user clicks the “End Session” button in the pop-under
window.) Both the username and password are required to identify the
session. If there is more than one session with the same username, then
requesting the logout URL does not end any session.