Filter
Top Products
D9412GV2/D7412GV2 | Program Entry Guide | 2.0 GV2MAIN EN | 58
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
Consider the scope of the keypad used to access the
Custom Function. Each Custom Function is enabled
in the function menu by M## CC Address 1 [through
8] (refer to M## CC Address 1 [through 8] on page
78). If the Custom Function is not assigned to a
specific keypad address, it does not appear in the
menu.
The keystrokes simulate any sequence of keystrokes
the user can perform at a keypad. You can program
up to 32 keystrokes for each Custom Function.
D5200 Data Entry
Use the [↓] key on the D5200 to move the cursor to
the first data entry line. To enter more than sixteen
keystrokes, you must fill the first line of the data entry
line before you move to the second line. If you make
entries on the second line, and the first line has less
than sixteen characters, the second line clears when
you press [ENTER].
Custom Function
Default: 128
Selection:
128 to 143
Enter the Custom Function number you want to
program. You can program up to sixteen Custom
Functions, which are numbered 128 to 143.
CF### Text
Default: Refer to the program record sheet
Selection:
Sixteen alphanumeric characters.
See Section 2.10.2 Area Text on
page 57 for valid character entries.
Determines the menu text displayed at the keypad for
the custom function item. Use this text to represent
the functions performed by this menu item.
CF### Key Strokes
Table 25: CF### Key Strokes
Default:
Selection
:
Refer to the program record sheet
Up to 32 characters: 0 to 9, A, B, C, D, E
Selection D1255 Key
D1255
Faceplate
Label
D1260 Key
0 to 9 0 to 9 0 to 9
A [COMMAND]
[COMMAND]
B [PREV]
(previous)
NA
C [ESC]
(escape)
MENU NA
D [NEXT] NA
E [ENT] {enter} YES [#ENTER]
C1* NA (softkey 1)
C2* NA {softkey 2)
C3* NA (softkey 3)
C4* NA {softkey 4)
C5* NA (softkey 5)
C6* NA {softkey 6)
C7* NA (softkey 7)
C8* NA {softkey 8)
* Softkey selections are stored as two keystrokes.
The scope of the keypad where you
access the Function List can affect the
way the Custom Function operates.
Figure 3: Softkey Locations on the D1260
Keypad
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
COMMAND
*
ENTER
#
7
1
2
3
4
6
8
5
1 - Softkey 1 (C1) 5 - Softkey 5 (C5)
2 - Softkey 2 (C2) 6 - Softkey 6 (C6)
3 - Softkey 3 (C3) 7 - Softkey 7 (C7)
4 - Softkey 4 (C4) 8 - Softkey 8 (C8)