Filter
Top Products
D9412GV2/D7412GV2 | Program Entry Guide | 5.0 RADXSKED EN | 122
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
Default: Blank
Selection: 1 to 11, 13 to 24, 28, 29
S## Door 1 [through 8]
Default: No
Yes Enable the sending
of No Entry Events
for Door #.
No Entry Events On: The
control panel can log No Entry
Events when an invalid token is
detected for a specific door. No
Entry Events include No Entry-
Secured, No Entry-Interlock, No
Entry-Unknown ID, and No
Entry-Level. These events can
be directed to print at a local
printer or send a report remotely
through phone routing. This
sked enables No Entry Events
to be reported for Door #.
23
Selection: Yes or No
Do not enable the
sending of No
Entry Events for
Door #.
No
This parameter enables the sending
of No Entry Events for Door #.
S## Door 1 [through 8]
Default: No
Yes Enable the
reporting of No
Entry Events for
Door #.
No Entry Events Off: The
control panel can log No Entry
Events when an invalid token is
detected for a specific door. No
Entry Events include No Entry-
Secured, No Entry-Interlock, No
Entry-Unknown ID, and No
Entry-Level. These events can
be directed to print at a local
printer or send a report remotely
through phone routing. This
sked disables No Entry Events
to be reported for Door #.
24
Do not enable the
reporting of No
Entry Events for
Door #.
Selection: Yes or No
No
This parameter disables the sending
of No Entry Events for Door #.
Expanded Off-Normal Test Report: To generate this event, one or more points must be in an off-
normal state at the time the sked executes. In addition, any system trouble that is active also
generates an Expanded Off-Normal Test Report. Expanded Off-Normal Test Reports include the Off
Normal Test Report Event as well as the supplementary event at the time the report is generated.
28
The Event Log shows only a Test Report Event.
If none of these conditions exists at the time the sked executes, only a Sked Executed Event is
generated and the Off-Normal Test Report is not sent.
Non-Expanded Off-Normal Test Report: Non-Expanded Off-Normal Test Report Events are only
sent when any point is in the off-normal state from any area, but only sends the Off Normal Test
Report Event. Any system trouble that is active also generates a Non-Expanded Off-Normal Test
Report.
29
The Event Log only shows a Test Report Event.
If none of these conditions exist at the time the sked executes, only a Sked Executed Event is
generated and the Non-Expanded Off-Normal Test Report is not sent.
To meet UL 864 daily Test Report requirements (when using two phone lines), you must still use
Sked Function Code 9, Test Report and program it to occur on a daily basis as per AHJ
requirements.