Filter
Top Products
D9412GV2/D7412GV2 | Program Entry Guide | EN | 2
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
System Requirements
Minimum system requirements for
Classification in accordance with
ANSI/SIA CP-01-2000:
• UL Listed and Classified control unit
Model D9412GV2 or D7412GV2
• UL Listed and Classified keypad Model
D1256, D1257, D1260, D1255,
D1255R, or D1255 RW
• UL Listed Local Bell
The minimum firmware requirements for SIA CP-01
compliance are:
Control Panel Firmware Version
D9412GV2 7.05 or later
D7412GV2 7.05 or later
Trademarks
CoBox™ is a registered trademark of Lantronix
®
.
Windows
®
is a registered trademark of Microsoft
Corporation in the United States or in other countries.
Molex
®
is a registered trademark of Molex
Incorporated.
Documentation Conventions
Type Styles Used in this Manual
To help identify important items in the text, the
following type styles are used:
Prompt
A thick border is used to indicate
a main programming entry as
seen in the Remote
Programmer’s Display. It is used
as a section heading and screen
example. Shaded boxes indicate
programmer prompts that are
only available when Custom or
View events are selected.
Sub-Promp
t
A dashed border indicates a sub
entry under a main programming
entry.
Warnings, Cautions, and Notes
Throughout this document helpful tips and notes are
presented concerning the entire application or
programming the unit. They are displayed as follows:
Warning!
These warn of the possibility of physical
damage to the operator, program and/or
equipment. Use this when there is an
increased risk of physical damage to the
operator (severe injury or death) or
equipment (destruction of physical
components).
Caution
These caution the operator that physical
damage to the program and/or equipment.
Important Notes
These notes should be heeded for
successful operation and programming.