Filter
Top Products
D9412GV2/D7412GV2 | Program Entry Guide | 2.0 GV2MAIN EN | 57
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
Enter the text that appears when all areas sharing the
same account number are master armed. The ACCT
IS ON text appears at all keypads assigned to these
areas, if more than one area has the same account
number. The ACCT IS ON text also appears if only
one area in the system is used. Refer to the prompts
CC# Area Assign and Area # Acct Is On in Section
2.10.2 Area Text
Use this programming category to create custom Idle
Text displays for the keypads.
Each display can be programmed with up
to sixteen alphanumeric characters,
including: A to Z, 0 to 9, ?, &, @, -, *,
+, $, #, _, /.
Characters not listed are invalid and
cannot be used for text.
2.10.1 Keypad (Command Center) Assignment on
page
51. When all areas in the account are master
armed, the Area # Is On text is replaced by the ACCT
IS ON text if the area is armed before all other areas
with the same account number.
Area
Blank Entry
Default: 1
A blank entry disables the ACCT IS ON display for
this area. An account wide area shows the AREA # IS
ON text instead of the ACCT IS ON text.
Selection:
1 to 8
Enter the area number you are programming.
Unique ACCT IS ON Text
Area# Is On
Each area can have unique ACCT IS ON text, or you
can program the same text in each area of the
account so when all the areas in the account are
armed, they all show the same text.
Default: Refer to the program record sheet
Selection:
Sixteen alphanumeric characters
D1260 Alpha V Keypad
Enter the text for this area that appears when the area
is master armed or master instant armed and other
areas sharing the same account number are not yet
master armed. This display does not appear when the
area is perimeter armed.
Although it is not programmed in this area, the D1260
Alpha V Keypad can display up to sixteen characters
for an Area Name on line 1 of its display. The Area
Text (Area # Is Off, Area # Not Ready, Area # Is On,
and Acct # Is On) programmed in this module
appears on line 2 of the D1260 Alpha V Keypad.
When programming custom text, it should be logical
to users viewing it on the D1260. For example, the
Area Name Text can be programmed to display Front
Office and the Area # Is Off text (programmed in this
section) could be programmed to display Ready To
Arm. The D1260 would then show on line 1 Front
Office and on line 2, Ready To Arm.
Area# Not Ready
Default: Refer to the program record sheet
Selection:
Sixteen alphanumeric characters
Enter the text for this area that displays when the area
is disarmed but points are faulted.
Area# Is Off
2.10.3 Custom Function
Default: Refer to the program record sheet
Use custom functions to simplify complex keystroke
sequences entered at the keypad. These items are
similar to speed dialing on a telephone. When the
custom function appears on the keypad, a user can
execute a request by pressing [ENTER]. You can
have up to sixteen custom functions and restrict their
use by area and authority level.
Selection:
Sixteen alphanumeric characters
Enter the text for this area that displays when the area
is disarmed and no points are faulted.
Area# Acct Is On
Each Custom Function ### item has sixteen
characters of programmable text (CF### Text). When
the Custom Function is assigned to the menu M##
Function (refer to Section
Default: Refer to the program record sheet
Selection:
Sixteen alphanumeric characters
2.12 Function List on page
77) the user can press [PREV] or [NEXT] to scroll to
CF### Text. The user accesses the menu by
pressing [MENU] on the keypad.
The user needs the appropriate authority level
enabled for the L## C Function 128 to 143 in Section
2.11 User Interface on page 60, to use the custom
function.