Page 736 of 894 NTAK79 2.0 Mb PRI card
553-3001-211 Standard 2.00 September 2004
NTAK79 switches
The NTAK79 card incorporates four on-board dip switches. The tables that
follow provide information on the various settings and related functions of
these switches.
Note: The ON position for all the switches is towards the bottom of the
card. This is indicated by a white dot printed on the board adjacent to the
bottom left corner of each individual switch.
DCH On (Red) DCH is switched on and disabled.
On (Green) DCH is switched on and enabled, but not necessarily
established.
Off DCH is switched off.
Table 234
NTAK79 LEDs (Part 3 of 3)
LED State Definition