Page 630 of 894 NT8D15 E&M Trunk card
553-3001-211 Standard 2.00 September 2004
Idle state
For E&M signaling, in the idle state the M lead is ground and the E lead is an
open circuit.
Outgoing calls are processed as follows:
• The M lead changes from ground to battery.
— If answer supervision is provided by the far end, there is a change
from open to ground on the E lead (ground detection).
Figure 145
Signaling orientation for tandem connection between E&M and CO trunks
Far end PBX
CO
553-6262
Near end PBX
(senderized)
E&M
Incoming
Outgoing
Tie trunk
PBX-CO trunk
CO/FX/
WATS