NT6D80 MSDL card Page 387 of 894
Circuit Card Description and Installation
Table 143 lists the synchronous interface specifications and the means of
configuring the interface parameters.
Asynchronous transmission uses an internal clock to generate the appropriate
baud rate for serial controllers.
Table 144 lists asynchronous interface specifications and the means of
configuring interface parameters.
Table 143
Synchronous interface specifications
Parameter Specification Configured
Data bits In packets-Transparent N/A
Data rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4,
48, 56, and 64 kbps
Software
Transmission Full Duplex N/A
Clock Internal/External Software
Interface RS-232 Software
RS-422 Switches
Mode DTE or DCE Switches
Table 144
Asynchronous interface specifications (Part 1 of 2)
Parameter Specification Configured
Data bit, parity 7 bits even, odd or no
parity, or 8 bits no parity
Software
Data rate 0.3, 0.6, (1.2), 2.4, 4.8,
9.6, 19.2, and 38.4 kbps
Software
Stop bits 1 (default), 1.5, 2 Software
Transmission Full Duplex N/A
Interface RS-232 Software