NT5D11 and NT5D14 Lineside T1 Interface cards Page 217 of 894
Circuit Card Description and Installation
Each of these commands can be executed by typing the first letter of the
command or by typing the entire command. Command sets are entered by
typing the first letter of the first command, a space, and the first letter of the
second command or by typing the entire command. Table 83 shows all the
possible command sets, listed in alphabetical order. These commands are
described by subject later in this section.
Notation Used:
CAPS - Required Letters [ ] -
Optional
| - Either/
Or
Table 83
MMI commands and command sets (Part 1 of 3)
Command Description
A D Alarm Disable
Disables all alarms.
A E Alarm Enable
Enables all alarms.
C A Clear Alarm
Clears all alarms, terminates line processing, and resets the T1 bit error rate and
frame slip counters.
C A L Clear Alarm Log
Clears the alarm log.
C E Clear Error
Clears the error counter for the T1.
D A [P] Display Alarms [Pause]
Displays the alarm log – a list of the most recent 100 alarms along with time and
date stamps.