Filter
Top Products
2 - 30
2 SYSTEM CONFIGURATION
(c) Ethernet IP address display mode overview
7-segment LED Operation overview
Disconnect
Connect
(10Mbps)
Connect
(100Mbps)
Full duplex
Half duplex
IP address
(Note)
(ex. 192.168.3.39)
Subnet mask pattern
(Note)
(ex. 255.255.255.0)
Default router IP
address
(Note)
(ex. 192.168.3.1)
Link status
(Note): When the Ethernet parameters are not written in the Motion controller, the addresses
are displayed as follows.
• IP address : 192.168.3.39
• Subnet mask pattern : 255.255.255.0
• Default router IP address : 192.168.3.1