Filter
Top Products
Software Developer’s Manual 261
Register Descriptions
PHY Port Configuration Register (82541xx and 82547GI/EI Only)
PPCONF (16d; R/W)
Energy Detect 9:8
Energy Detect.
0xb = Off.
10b = Sense only on receive.
11b = Sense and periodically transmit
NLP.
R/W 0b Retain
Force Link Good 10
1b = Force link good.
0 b = Normal operation.
If link is forced to be good, the link state
machine is bypassed and the link is
always up. In 1000BASE-T mode this
has no effect.
R/W 0b Retain
Assert CRS on
Transmit
11
1b = Assert on transmit.
0b = Never assert on transmit.
This bit has no effect in full duplex.
R/W 0b Retain
Receive FIFO depth 13:12
00b = ± 16 Bits
01b = ± 24 Bits
10b = ± 32 Bits
11b = ± 40 Bits
00b = ± 8 Bits
01b = ± 12 Bits
10b = ± 16 Bits
11b = ± 20 Bits
R/W 00b Retain
Receive FIFO is enabled in internal
SerDes mode
2
or serial interface mode.
Transmit FIFO depth 15:14
00b = ± 16 Bits
01b = ± 24 Bits
10b = ± 32 Bits
11b = ± 40 Bits
00 b= ± 8 Bits
01b = ± 12 Bits
10b = ± 16 Bits
11b = ± 20 Bits
R/W 00b Retain
Transmit FIFO is enabled in 1000BASE-
T mode or serial interface mode.
1. 82544GC/EI only.
2. TBI Mode for the 82544GC/EI.
Table 13-32. PHY Port Configuration Register Bit Description
Field Bit(s) Description Mode HW Rst SW Rst
Reserved 0 Write to 0b for normal operation. R/W 0b 0b
Alternate NP Feature 1
1b = Enable alternate Auto-Negotiate
next page feature.
0b = Disable alternate Auto-Negotiate
next page feature.
If polarity is disabled, then the polarity is
forced to be normal in 10BASE-T.
R/W 0b 0b
Reserved 3:2 Write to 0b for normal operation. R/W 0b 0b
Table 13-31. PHY Specific Control Register Bit Description
Field Bit(s)
Description
Mode HW Rst SW Rst
1000BASE-T 10/100BASE-T