Filter
Top Products
• Select the parity that the PIN pad uses (the default setting is Even). This
information should be provided by your device's documentation.
• Select the data bits setting appropriate for your PIN pad (the default setting is 7).
This information should be provided by your device's documentation.
• If you've selected the VeriFone SC 5000 (MAC) as your PinPad, click the Key
Change button that appears under the Cancel button. PCCharge will contact
your processing company and synchronize your PIN pad's key with what your
processing company has set up for your debit account.
4. Click OK to save these settings and return to the main PCCharge window. You may
now perform a test transaction using your device (see page 81), or you may proceed
to the next section, Touch Screen Setup (see page 96).
Tested PIN Pads
We test PCCharge with a wide range of hardware in a variety of conditions. If you have
hardware not shown on this list and are able use it successfully with your copy of
PCCharge, please contact us at
feedback@pccharge.com and inform us of your results.
Set up each device as specified in the Notes column. If no additional information is given
(other than the device to be selected from the drop-down list in PCCharge), use the default
settings listed above.
(
Note: Some PIN pads will only work with certain payment processing
companies. Check with your processing company and/or merchant service
provider to determine which PIN pads are available for you to use.
Manufacturer Product 98 2000 XP 2003 Notes
@pos PenWare 3100 X X X X
Signature capture device.
Set up in PCCharge as
@pos PenWare 3100.
Ingenico 3010 X X X X
Set up in PCCharge as
Ingenico 3010.
Ingenico eN-Crypt 2100 X X X X
Set up in PCCharge as eN-
Crypt 2100.
Ingenico eN-Touch 1000 X X X X
Signature capture device.
Set up in PCCharge as eN-
Touch 1000.
• Baud = 9600
• Parity = None
• Data Bits = 8
• Time Out = 4
VeriFone 1000 X X X X
Set up in PCCharge as
VeriFone 101/1000.
• Baud = 1200
• Parity = Even
• Data Bits = 7
• Time Out = 4
94