Filter
Top Products
Update Configuration Disk
Simple Explanation: PCCharge's Update Configuration Disk feature
allows you to create a backup disk (a 3½" floppy disk) that contains your
merchant configuration information--essentially, everything you've set up to this
point.
• If your copy of PCCharge was shipped with a Configuration Disk or
License Disk on a 3½" floppy disk, you already have this backup disk
and only need to update it.
• If your copy of PCCharge was shipped with a Configuration Disk or
License Disk on a CD, you may create a separate backup disk that can
be edited (unlike a read-only CD).
You can create/update this disk during installation, or you can wait until a later
time. However, we HIGHLY recommend that you create this disk soon after
you install and configure PCCharge.
(
Note: Configuration disks can be created using almost any removable media
that can be modified. You may even store your configuration data on a
separate computer accessed via a network. The important thing is to store your
backup data away from the computer on which PCCharge is installed. To use
some other media, just substitute it for the 3½" floppy referred to in the
following instructions. In step 3, browse to the media to be used.
1. Click Yes. The Configuration Disk Maintenance window will appear. You'll see that
Update/Create Config Disk is already selected. Click OK.
2. PCCharge will warn you that your existing configuration information will be overwritten.
• If you're creating a configuration disk for the first time, this warning doesn't apply
to you. Click Yes. PCCharge will prompt you for the configuration disk. Insert a
BLANK 3½" floppy disk. Make sure it's blank, because everything on the disk will
be overwritten. Click OK and proceed to step 3.
• If you already have a configuration disk, you can either overwrite that disk or
create a new one using a blank disk. Click Yes when ready. Insert your
configuration disk OR a blank 3½" floppy disk. Click OK and proceed to step 3.
3. PCCharge will display a window titled Copy Configuration Files To…. Click the
Open button and PCCharge will create or update your configuration disk.
73