Filter
Top Products
D9412GV3/D7412GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters EN | 70
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
L## Send Report
Default: Refer to the program record sheet
Selection: - or E
Function
No.
Function Name
Alternate
Keystroke
13 Send Report
[COMMAND][4][1]
or
[COMMAND][4][2]
Send a Test Report from any keypad assigned to an
area where the user has authority.
Access Control Functions
Use the following functions to control the doors from
the keypad. Users can have authority to access the
Door Control and can use all or part of the functions
within.
All doors display when this function is
selected. This function does not follow
the scope of the keypad.
L## Door Control
Default: Refer to the program record sheet
Selection: - or E
Function
No.
Function Name
Alternate
Keystroke
14 Door Control [COMMAND][4][6]
This item only allows programming access to the
following three sub-prompts. It does not affect the
user’s access to Cycle Door, Unlock Door, and
Secure Door.
Cycle Door, Unlock Door, and Secure
Door cannot be accessed through the
Function List. Door Control must be
added to the Function List to access the
door control functions, or COMMAND 46
can be used.
The following prompts are sub-functions of Door
Control.
Cycle Door must be enabled for all three
sub-functions to operate. If Cycle Door is
disabled, all three sub-functions do not
operate.
L## Cycle Door
Default: Refer to the program record sheet
Selection: - or E
Function
No.
Function Name
Alternate
Keystroke
(None) Cycle Door
(Menu function
only)
Cycle Door (Menu Function only)
To cycle the doors, press number [1] through [8] on
the keypad, corresponding to the door number. For
example, pressing [2] and [ENTER] cycles door
number 2, which is indicated by C in the display.
Refer to “Cycle Door” in Table 26 on page 71.
Cycle Door allows the user with this authority level to
access the CYCLE? 12345678 function.
L## Unlock Door
Default: Refer to the program record sheet
Selection: - or E
Function
No.
Function Name
Alternate
Keystroke
(None) Unlock Door
(Menu function
only)
To unlock or relock a door, press number [1] through
[8] on the keypad, corresponding to the door number
(refer to “Unlock Door” in Table 26 on page 71). For
example, pressing [2] and [ENTER] unlocks door
number 2. The display indicates “U’ (for unlock door)
with the door number. Select the same door number
again and press [Enter] to relock the door.
Unlock Door allows the user with this authority level
to access the UNLOCK? 12345678 function.
L## Secure Door
Default: Refer to the program record sheet
Selection: - or E
Function
No.
Function Name
Alternate
Keystroke
(None) Secure Door
(Menu function
only)
Press number [1] through [8] on the keypad,
corresponding to the door number to secure or
unsecure a door (refer to “Secure Door” in Table 26
on page 71).For example, pressing [2] and [ENTER]
secures door number 2, which is indicated by an X in
the display.
Secure Door allows the user with this authority level
to access the SECURE? 12345678 function.