Filter
Top Products
D9412GV3/D7412GV3 | Program Entry Guide | 1.0 Introduction EN | 7
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
1.2.1 Local Keypad Programming
GV3 now offers a Local Keypad Programming menu with the Service Passcode only. It includes all custom
options. For a list of program items you can set using Keypad Programming, refer to Figure 1 on page 7 and
Figure 2 on page 8. To access the Keypad Programming menu, the Keypad Programming option must be set
to P (refer to Section 2.10.5 Configuration Authorityon page 66), and all control panel areas must be disarmed.
Figure 1: D1255 Keypad Programming Menu and Page References
Refer to Phone #
on page 12.
Refer to Phone # Format
on page 13.
Refer to Enhanced Comm
on pages 130 to 132.
Refer to R# Primary Device
on page 18 and R# Backup Device on page 19.
Refer to
RPS Passcode
on page 32.
Refer to RPS Phone #
on page 34.
Refer to RPS IP Address #
on page 129.
Refer to
RPS Port Number
on page 129.
Refer to Area# Area On on page 36 and
Area# Account Number on page 36.
Refer to
CC# Enhanced Command
Center
on page 51 and
CC# Scope on page 55.
Refer to
2.10.5 Configuration Authority
on page 67.
Refer to P### Point Index
on page 101.