Filter
Top Products
D9412GV3/D7412GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters EN | 25
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
When activating an on-board relay using
remote automation software, the
D9412GV3 and D7412GV3 Control
Panels log and print the resulting event
as:
Relay 250 (Relay A)
Relay 251 (Relay B)
Relay 252 (Relay C)
Auto Function Reports
The following prompts support customized routing of
Auto Function Reports. Selecting Yes enables a
report to be sent when the event occurs.
Table 15: Auto-Function Reports
Report Selections Report Description
R# Sked
Executed
Yes, No
Sked Executed
Event
R# Sked
Changed
Yes, No
Sked Changed
Event
R# Execute
Fail
Yes, No
Fail to Execute
Event
RPS Reports
Selecting Yes enables sending a report when the
RPS Passcode Event occurs.
"RPS Access Fail" might indicate a
wrong RPS passcode when
communicating with the control panel,
or a valid RPS session was abnormally
terminated. "Remote Reset" indicates a
Reset command was issued from RPS.
"Fail to Call RPS" indicates that control
panel called RPS, but was unable to
connect.
Table 16: RPS Reports
Report Selections Report Description
R# Log
Threshold
Yes, No
Event log threshold
reached
R# Log
Overflow
Yes, No
Log is full, old events
are overwritten
R# Para
Changed
Yes, No
RPS Parameter
Change Event
R# RPS OK Yes, No
Successful RPS
Access Event
R# RPS Fail Yes, No
Failed Access RPS
Event
R# Remote
Reset
Yes, No Remote Reset Event
R# Program
OK
Yes, No
Successful Local
Programming Event
R# Program
Fail
Yes, No
Failed Local
Programming Event