Filter
Top Products
D9412GV3/D7412GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters EN | 27
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
Access Reports
Selecting Yes enables a report to be sent when the
event occurs.
Access Granted, No Entry, Request to
Enter (RTE) and Request to Exit (REX)
Events can be enabled or disabled by
each D9210B.
Table 19: Access Reports
Report Selections Report Description
R# Access
Granted
Yes, No
Access Granted
Event
R# No Entry Yes, No No Entry Event
R# Door Lt
Open
Yes, No
Door Left Open
Event
R# Cycle
Door
Yes, No Open Door Event
R# Door
Unlocked
Yes, No Unlock Door Event
R# Door
Secure
Yes, No Secure Door Event
R# Door
Request
Yes, No RTE or REX Event
R# Door
Locked
Yes, No Locked Door Event
2.3.10 Event Priority
Table 20 on page 27 shows the description of each
event, its priority, and event number.
Table 20:Event Descriptions, Priorities, and
Numbers
Event Description
Event
Priority
Event
Number
Fire Alarm 001 011
Fire Alarm Restoral 005 014
Fire Missing 005 013
Fire Trouble 005 012
Fire Supervision 005 124
Fire Restoral (after Tbl, Msg,
Bypass)
005 015
Fire Cancel 004 027
Fire Supervision Missing 005 146
Fire Supervision Restore 005 123
Alarm Report 003 016
Duress 002 004
Missing Alarm 006 019
User Code Tamper 008 055
Trouble Report 006 017
Missing Trouble 008 020
Non-Fire Supervision 006 078
Point Bus Fail 006 024
Point Bus Restoral 006 091
Non-Fire Cancel 004 045
Alarm Restore 006 026
Supervision Missing 008 147
Unverified Event 006 169
Point Bypass/Command Bypass 007 007
Forced Point 007 008
Point Opening 008 021
Point Closing 008 022
Was Force Armed 007 034
Fail To Open 008 040
Fail To Close 008 041
Extend Close Time 008 044
Opening Report 008 047
Forced Close 007 048
Closing Report 008 050