Filter
Top Products
D9412GV3/D7412GV3 | Program Entry Guide | 4.0 Schedules (Skeds) EN | 123
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
S## Time
Default: 00:00
Selection: HH:MM (hours and minutes)
Enter the time that the sked executes. Make entries
using a 24-hour clock (for example, 7:00 AM is
entered as 07:00, 2:45 PM is entered as 14:45).
Disabled skeds can have their time set to Disabled;
however, to ensure that a sked is fully disabled, enter
[COMMAND][5][2] (Change Skeds function) and
select DISABLE?.
S## Date
Default: _ _ / _ _
Selection: MM/DD (month and date)
Enter the date that the sked executes.
Disabled skeds have their date set to Disabled. If
you receive from the control panel and the entry for
this prompt is Disabled, but dates were programmed
before, the sked can be disabled from the keypad
using the Change Skeds function.
S## Sunday
Default: No
Selection: Yes or No
Yes Activate this sked on Sundays.
No
Do not activate this sked on
Sundays.
This prompt and the next six prompts select the days
of the week when the sked is active.
Exceptions:
To prevent the sked from activating on certain days
of the year, program Xept Holiday as Yes, and
enable at least one Holiday Index. When Xept
Holiday is programmed as Yes, the window
executes on the days of the week programmed
unless the date is designated as a holiday by the
Holiday Index selected.
If a sked is only needed on certain days of the year,
do not program the sked to execute on specific days
of the week. Instead, program Xept Holiday as No,
and select a Holiday Index with the dates you want
the window to be active.
To meet UL 864 requirements for
Central Station and Remote Station
applications, program each day of the
week to Yes for the required Test
Report Sked.
S## Monday
Default: No
Selection: Yes or No
S## Tuesday
Default: No
Selection: Yes or No
S## Wednesday
Default: No
Selection: Yes or No
S## Thursday
Default: No
Selection: Yes or No
S## Friday
Default: No
Selection: Yes or No
S## Saturday
Default: No
Selection: Yes or No
S## Xept Holiday
Default: No
Selection: Yes or No
Yes
Prevent this sked from operating on
the holidays identified in the specific
Holiday Index(es) used with this
sked. Specific Holiday Indexes are
selected in this programming section
and programmed in the next
programming module.
No
This sked operates on holidays
programmed in the Holiday
Index(es) used with this sked.
If no days of the week are programmed, this sked
operates only on the holidays programmed in the
Holiday Index(es) used with this sked. This sked also
operates if the holiday falls on a day of the week that
is programmed.