Filter
Top Products
Polycom® RealPresence Collaboration ServerVirtual Edition Administrator’s Guide
G-14 Polycom, Inc.
33 In the Reset Confirmation dialog box, click No to modify the required system flags before
resetting the MCU, or click Yes if the flag was already set.
Collaboration Server System Flag Configuration
Enabling the Microsoft Environment
The Collaboration Server can be installed in Microsoft R2 environments. To adjust the
Collaboration Server behavior to the Microsoft environment in each release, system flags
must be set.
To configure the system flags on the Polycom Collaboration Server system:
1 On the Collaboration Server menu, click Setup > System Configuration.
The System Flags - MCMS_PARAMETERS_USER dialog box opens.
2 Scroll to the flag MS_ENVIRONMENT and click it.
The Edit Flag dialog box is displayed.
3 In the Value field, enter YES to set the Collaboration Server SIP environment to
Microsoft solution.
4 Click OK to complete the flag definition.
5 When prompted, click Yes to reset the MCU and implement the changes to the system
configuration. After system reset the Collaboration Server can register to the OCS
server and make SIP calls.
Reset can be performed after setting the system flags (for example, setting the MS_ENVIRONMENT
flag). Sometimes the system fails to read the *.pfx file and the conversion process fails, which is
indicated by the active alarm “SIP TLS: Registration server not responding” and/or “SIP TLS:
Registration handshake failure”. Sending *.pfx file again, as described in this procedure and then
resetting the system may resolve the problem.
Collaboration Server set to MS_ENVIRONMENT=YES supports SIP over TLS only and not over
TCP.
Sometimes the system fails to read the *.pfx file and the conversion process fails, which is indicated
by the active alarm “SIP TLS: Registration server not responding” and/or “SIP TLS: Registration
handshake failure”. Sending *.pfx file again, as described in this procedure and then resetting the
system may resolve the problem.