Filter
Top Products
Chapter 8-Address Book
Polycom, Inc. 8-11
4 Usually, additional definitions are not required and you can use the system defaults for
the remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
Extension/Identifier
String
Dial-out participants that connect to an external device such as
Cascaded Links or Recording Links may be required to enter a
conference password or an identifying string to connect. Enter the
required string as follows:
[p]…[p][string]
For example: pp4566#
p - optional - indicates a pause of one second before sending the
DTMF string. Enter several concatenated [p]s to increase the delay
before sending the string. The required delay depends on the
configuration of the external device or conference IVR system.
String - enter the required string using the digits 0-9 and the
characters * and #. The maximum number of characters that can be
entered is identical to the H.323 alias length.
If the information required to access the device/conference is
composed of several strings, for example, the conference ID and the
conference password, this information can be entered as one string,
where pauses [p] are added between the strings for the required
delays, as follows:
[p]…[p][string][p]…[p] [string]...
For example: p23pp*34p4566#
Extension/Identifier
String (continued)
The Collaboration Server automatically sends this information upon
connection to the destination device/conference. The information is
sent by the Collaboration Server as DTMF code to the destination
device/conference, simulating the standard IVR procedure.
Table 8-3 New Participant – General Properties (Continued)
Field Description