Filter
Top Products
Polycom® RealPresence Collaboration ServerVirtual Edition Administrator’s Guide
20-12 Polycom, Inc.
3 To modify a flag value, double-click or select the flag and click the Edit Flag button.
4 In the New Value field, enter the flag’s new value.
5 Click OK to close the Update Flag dialog box.
6 Repeat steps 2–4 to modify additional flags.
7 Click OK to close the System Flags dialog box
Manually Adding and Deleting System Flags
To add a flag:
1 In the System Flags dialog box, click the New Flag ( ) button.
The New Flag dialog box is displayed.
2 In the New Flag field enter the flag name.
3 In the Value field enter the flag value.
The following flags can be manually added to the
MCMS_PARAMETERS tab:
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server” on page 19-57.
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS
Flag Description
802_1X_CERTIFICATE_MO
DE
Not supported with RealPresence Collaboration Server Virtual
Edition.
802_1X_SKIP_CERTIFICAT
E_VALIDATION
Not supported with RealPresence Collaboration Server Virtual
Edition.
802_1X_CRL_MODE Not supported with RealPresence Collaboration Server Virtual
Edition.