Filter
Top Products
RealPresence Collaboration Server Virtual Edition Administrator’s Guide
C-10 Polycom, Inc.
Event Specific Fields
The following tables describe the fields which are specific to each type of event.
Some fields that were supported by the MGC Manager, are not supported by the Collaboration
Server. In addition, for some fields the Collaboration Server has a fixed value, whereas the MGC
Manager supported multiple values. For more information about the MGC Manager fields and values,
see the MGC Manager User’s Guide Volume II, Appendix A.
Table C-3 Event Fields for Event 1 - CONFERENCE START
Field Description
Dial-Out Manually Indicates whether the conference was a dial-out manually conference or not.
Currently the only value is:
0 - The conference was not a dial-out manually conference, that is, the MCU
initiates the communication with dial-out participants, and the user does not
need to connect them manually.
Auto Terminate Indicates whether the conference was set to end automatically if no
participant joins the conference for a predefined time period after the
conference starts, or if all participants disconnect from the conference and
the conference is empty for a predefined time period.
Possible values are:
0 - The conference was not set to end automatically.
1 - The conference was set to end automatically.
Line Rate The conference line rate, as follows:
0 - 64 kbps
6 - 384 kbps
12 - 1920 kbps
13 - 128 kbps
15 - 256 kbps
23 - 512 kbps
24 - 768 kbps
26 - 1152 kbps
29 - 1472 kbps
32 - 96 kbps
Line Rate (cont.) 33 - 1024 kbps
34 - 4096 kbps
Restrict Mode Not supported.
Always contains the value 0.
Audio Algorithm The audio algorithm.
Currently the only value is:
255 - Auto
Video Session The video session type.
Currently the only value is:
3 - Continuous Presence
Video Format The video format.
Currently the only value is:
255
-Auto