Filter
Top Products
Polycom® RealPresence Collaboration ServerVirtual Edition Administrator’s Guide
18-14 Polycom, Inc.
• Dialing in to a Meeting Room defined on any of the MCUs.
— A Meeting Room is a conference that is saved on the MCU. It remains in passive
mode until it is activated by the first participant, or the meeting organizer dialing
in. For more information about Meeting Rooms, see "Meeting Rooms” on page 6-1.
• Dialing in to an Ad Hoc Entry Queue defined on one of the MCUs which is used as the
access point to the MCU.
For a detailed description of Ad Hoc Entry Queues, see "Entry Queues” on page 7-1.
•Start any Conference Template saved in the Conference Templates list.
For more information, see "Starting an Ongoing Conference From a Template” on
page 18-14.
Starting a Conference from the Conferences Pane
To start a conference from the Conference pane:
1 In the MCUs pane, select the MCU to run the conference.
2 In the Conferences pane, click the New Conference ( ) button.
The New Conference – General dialog box opens.
The system displays the conference’s default Name, Duration and the default Profile,
which contains the conference parameters and media settings.
The Collaboration Server automatically allocates the conference ID, when the conference
starts.
In most cases, the default conference ID can be used and you can just click OK to launch
the conference. If required, you can enter a conference ID before clicking OK to launch
the conference.
If you are the meeting chairperson or organizer using the RMX Web Client to start your
own meeting, you need to communicate the default conference ID (or the one you
created) to the other conference participants so they can dial in.