Filter
Top Products
Chapter 20-System Configuration Flags
Polycom, Inc. 20-21
FORCE_STATIC_MB_ENCO
DING
This flag supports Tandberg MXP mode of sending and
receiving video by IP endpoint in HD 720p resolution and
Video Quality set to Motion.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
G728_IP Enables or disables declaration of G.728 Audio Algorithm
capabilities in IP calls.
Range: YES / NO
Default: NO
H239_FORCE_CAPABILITIE
S
When the flag is set to NO, the Collaboration Server only
verifies that the endpoint supports the Content protocols: Up
to H.264 or H.263.
When set to YES, the Collaboration Server checks frame rate,
resolution and all other parameters of the Content mode as
declared by an endpoint before receiving or transmitting
Content.
Default: NO.
H264_HD_GRAPHICS_MIN_
CONTENT_RATE
Determines the minimum content rate (in kbps) required for
endpoints to share H.264 high quality content via the Content
channel When Content Setting is Graphics.
Range: 0-1536
Default: 128
H264_HD_HIGHRES_MIN_C
ONTENT_RATE
Determines the minimum content rate (in kbps) required for
endpoints to share H.264 high quality content via the Content
channel When Content Setting is Hi Resolution Graphics.
Range: 0-1536
Default: 256
H264_HD_LIVEVIDEO_MIN_
CONTENT_RATE
Determines the minimum content rate (in kbps) required for
endpoints to share H.264 high quality content via the Content
channel When Content Setting is Live Video.
Range: 0-1536
Default: 384
H323_FREE_VIDEO_RESO
URCES
For use in the Avaya Environment.
In the Avaya Environment there are features that involve
converting undefined dial-in participants’ connections from
video to audio (or vice versa). To ensure that the participants’
video resources remain available for them, and are not
released for use by Audio Only calls, set this flag to NO.
If set to YES, the Collaboration Server will release video
resources for Audio Only calls.
Default: YES.
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description