Filter
Top Products
Polycom® RealPresence Collaboration ServerVirtual Edition Administrator’s Guide
18-12 Polycom, Inc.
Adding MCUs to the MCUs List
The RMX Manager can connect to one or several Collaboration Servers simultaneously. If the
site’s configuration includes more than one MCU, or when a new MCU is added to your
configuration, and you want to monitor and control all MCUs from within the same
window, you must add the MCU to the MCUs list.
To add the MCU to the list of MCUs being managed, define the MCU’s connection
parameters.
To add a Collaboration Server unit:
1 On the MCUs toolbar, click the Add MCU button to add an MCU to the MCU list.
The Add MCU dialog box opens.
2 Define the following parameters:
The Collaboration Server must be installed and its IP addresses properly configured in the
Management Network Service before defining its connection parameters in the RMX Manager
application.
Table 19 MCU Properties
Field Description
MCU Name Enter the name of the MCU on the network.
MCU IP Enter the IP address of the MCU’s Control Unit. The IP address must be
identical to the one configured in the MCU during first entry Configuration.
For more details, see the Polycom® RealPresence Collaboration Server
Virtual Edition Getting Started Guide, "To obtain the IP address of the
Virtual Machine:” on page 2-21.
Port Enter the number of the port used for communication and data
transactions between the Collaboration Server unit and the RMX
Manager.
For standard connection, enter 8080.
For a Secured connection (using TLS or SSL), enter 4433.
Note: When using the RMX Manager with other Collaboration Server
models, the standard connection port is 80 and the secured connection
port is 443.