Filter
Top Products
Polycom® RealPresence Collaboration ServerVirtual Edition Administrator’s Guide
19-24 Polycom, Inc.
Defining the SNMP Parameters in the Collaboration Server
The SNMP option is enabled via the Collaboration Server Web Client application.
The addresses of the Managers monitoring the MCU and other security information are
defined in the Collaboration Server Web Client application and are saved on the MCU’s hard
disk. Only users defined as Administrator can define or modify the SNMP security
parameters in the Collaboration Server Web Client application.
To enable SNMP option:
1 In the Collaboration Server Web Client menu bar, click Setup > SNMP.
The Collaboration Server-SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU that will be used by
the SNMP system to identify it.
2 In the Agent dialog box, click the SNMP Enabled check box.
3 Click the Retrieve MIB Files button to obtain a file that lists the MIBs that define the
properties of the object being managed.
The Retrieve MIB Files dialog box is displayed.
4 Click the Browse button and navigate to the desired directory to save the MIB files.
5001 License not found Not in use
(Product
activation
failure is
trapped)
Table 19-15 SNMP MIB entities that do not generate traps (Continued)
Key Description Comment