Filter
Top Products
Chapter 20-System Configuration Flags
Polycom, Inc. 20-23
MANAGE_TELEPRESENCE
_ROOM_SWITCH_LAYOUT
S
Determines whether the MLA or the RMX controls the Room
Switch Telepresence Layouts.
• When set to NO, the RMX does not manage Telepresence
Room Switch Layouts and they continue to be managed
by the MLA.
• When set to YES, the RMX manages Telepresence Room
Switch Layouts.
Default: NO
Range: YES / NO
Note: System re-start is not required for this flag’s settings to
take effect.
For more information see "Lecture Mode (AVC CP Only)” on
page 3-38.
MAX_ALLOWED_RTV_HD_
FRAME_RATE
Defines the threshold Frame Rate (fps) in which RTV Video
Protocol initiates HD resolutions.
Flag values are as follows:
Range: 0-30 (fps)
Default: 0 (fps) - Implements any Frame Rate based on Lync
RTV Client capabilities
MAX_RTV_RESOLUTION Enables you to override the Collaboration Server resolution
selection and limit it to a lower resolution, hence minimizing
the resource usage to 1 or 1.5 video resources per call
instead of 3 resources. Possible flag values are:
AUTO (default), QCIF, CIF, VGA or HD720.
MAX_TRACE_LEVEL This flag indicates the debugging level for system support.
Possible values:
TRACE = t, DEBUG = d, INFO_NORMAL = n, INFO_HIGH =
i, WARN = w, ERROR = e, FATAL = f, OFF = o.
Default: n
MAXIMUM_RECORDING_LI
NKS
The maximum number of Recording Links available for
selection in the Recording Links list and the Conference
Profile - Recording dialog box.
Range: 1 - 100
Default: 20
MINIMUM_FRAME_RATE_T
HRESHOLD_FOR_SD
Low quality, low frame rate video is prevented from being sent
to endpoints by ensuring that an SD channel is not opened at
frame rates below the specified value.
Range: 0 -30
Default: 15
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description