Filter
Top Products
Chapter 15-IP Network Services
Polycom, Inc. 15-17
Skip certificate
validation
Not supported in the RealPresence Collaboration Server Virtual
Edition.
Revocation Method The certificate revocation method:
• ONE (Default) - Certificate Revocation is not implemented.
• CRL - Requires at least one CRL file be installed, failing which an
error message, At least one CRL should be installed, is displayed.
Global Responder
URL
Not supported in the RealPresence Collaboration Server Virtual
Edition.
Use Responder
Specified in
Certificate
Not supported in the RealPresence Collaboration Server Virtual
Edition.
Allow Incomplete
Revocation Checks
• If the check box is checked and the CRL of the specific CA is not
loaded, all Certificates are the CA are not considered revoked.
• If the check box is unchecked and the CRL of the specific CA is
not loaded, all Certificates are the CA are considered revoked.
Skip Certificate
Validation for OSCP
Responder
Not supported in the RealPresence Collaboration Server Virtual
Edition.
SIP Servers: Primary / Backup Server Parameter
Server IP Address Enter the IP address of the preferred SIP server.
If DNS is used, you can enter the SIP server name.
Server Domain Name Enter the name of the domain that you are using for conferences, for
example:
user_name@domain name
The domain name is used for identifying the SIP server in the
appropriate domain according to the host part in the dialed string.
For example, when a call to EQ1@polycom.com reaches its
outbound proxy, this proxy looks for the SIP server in the
polycom.com domain, to which it will forward the call.
When this call arrives at the SIP server in polycom.com, the server
looks for the registered user (EQ1) and forwards the call to this Entry
Queue or conference.
Port Enter the number of the TCP or UDP port used for listening. The port
number must match the port number configured in the SIP server.
Default port is 5060.
Outbound Proxy Servers: Primary / Alternate Server Parameter
Server IP Address By default, the Outbound Proxy Server is the same as the SIP Server.
If they differ, modify the IP address of the Outbound Proxy and the
listening port number (if required).
If DNS is used, you can enter the SIP server name.
Port Enter the port number the outbound proxy is listening to.
The default port is 5060.
Table 15-9 Default IP Network Service – SIP Servers (Continued)
Field Description