Filter
Top Products
Chapter 15-IP Network Services
Polycom, Inc. 15-7
5 Click OK.
6 If you have modified the Management Network Properties, reset the MCU.
Modifying the Default IP Network Service
The Default IP Service parameters need to be modified if you want to change the:
• Gatekeeper parameters or add gatekeepers to the Alternate Gatekeepers list
• SIP server parameters
To view or modify the Default IP Service:
1 In the Collaboration Server Management pane, click IP Network Services ().
2 In the Network list pane, double-click the Default IP Service ( , , or ) entry.
If an attempt is made to modify these settings, the message below will be displayed:
In the RealPresence Collaboration Server Virtual Edition, both the Default IP Network Service and
the Management Network Service use the same IP address and subnet mask. These settings can
be modified only using the text user interface. To modify the IP address and subnet mask, see the
Polycom® RealPresence Collaboration Server Virtual Edition Getting Started Guide, "Manual IP
Configuration”
on page 2-22.