Filter
Top Products
RST
- 60 -
{ RST ... Device resetting
Usable device
Bit device
Word device
Con-
stant
Pointer Level
X Y M L SM F T C D R Z K H P N
Digit
desig-
nation
No. of
steps
Index
D
1/2
Reset command
RST
D
Setting data
D
Device No. to
be reset
Function
(1) The designated device will change as explained below when the RST input turns ON.
Device Status
Y, M, L, SM, F
The coil and contact are turned OFF.
T, C 0 is set for the current value, and the coil and
contact are turned OFF.
(2) If the RST input is OFF, the state of the device will not change.
Execution condition
The execution conditions for the RST command are as shown below.
RST input OFF
RST
ON
Executed per scan Executed per scan