Filter
Top Products
MOV
- 118 -
{ MOV ... 16-bit data transmission
Usable device
Bit device Word device
Con-
stant
Pointer Level
X Y M L SM F T C D R Z K H P N
Digit
desig-
nation
No. of
steps
Index
S
D
*1
3
: MOV from a bit device (word device) to Z is not possible. (MOV to Z is possible only for a constant.)
Z cannot be independently placed on the source side, but can be used on the source side as
ornaments for D and R.
Refer to "Index Ornament" for details.
*1 MOV to device X can be programmed, but this is a command for testing by Mitsubishi. Do not use
it.
Transmission command
MOV
MOV S
D
Setting data
D
Transmission source
data or No. of device
where data is stored.
S
No. of transmission
destination device.
Function
The 16-bit data of the device designated with S is transmitted to the device designated with D.
Before transmission S
After transmission D
00 1 000111110
1
011
Transmission
00 1 0001111101011
16-bit
Execution conditions
The execution conditions for MOV are as shown below.
Transmission command OFF
MOV
ON
Executed per scan
Executed per scan