Filter
Top Products
4. Parameters
- 11 -
4.2 Bit Selection Parameters
The parameters that can be used in user PLC include bit selection parameters set in the bit type.
Set up data is stored in a file register and is backed up.
For use in bit operation in a sequence program, the file register contents are transferred to temporary
memory (M) using the MOV command. In contrast, if data is stored in the file register corresponding
to bit selection by using the MOV command etc., it is backed up. However, display remains
unchanged. Once display another screen and again select screen.
The corresponding between the bit selection parameters and file registers is listed below. The setting
and display screens are also shown.
#
Corresponding
file register
#
Corresponding
file register
#
Corresponding
file register
#
Corresponding
file register
6401 R2900-LOW 6433 R2916-LOW 6449 R2924-LOW 6481 R2940-LOW
6402 R2900-HIGH 6434 R2916-HIGH 6450 R2924-HIGH 6482 R2940-HIGH
6403 R2901-L 6435 R2917-L 6451 R2925-L 6483 R2941-L
6404 R2901-H 6436 R2917-H 6452 R2925-H 6484 R2941-H
6405 R2902-L 6437 R2918-L 6453 R2926-L 6485 R2942-L
6406 R2902-H 6438 R2918-H 6454 R2926-H 6486 R2942-H
6407 R2903-L 6439 R2919-L 6455 R2927-L 6487 R2943-L
6408 R2903-H 6440 R2919-H 6456 R2927-H 6488 R2943-H
6409 R2904-L 6441 R2920-L 6457 R2928-L 6489 R2944-L
6410 R2904-H 6442 R2920-H 6458 R2928-H 6490 R2944-H
6411 R2905-L 6443 R2921-L 6459 R2929-L 6491 R2945-L
6412 R2905-H 6444 R2921-H 6460 R2929-H 6492 R2945-H
6413 R2906-L 6445 R2922-L 6461 R2930-L 6493 R2946-L
6414 R2906-H 6446 R2922-H 6462 R2930-H 6494 R2946-H
6415 R2907-L 6447 R2923-L 6463 R2931-L 6495 R2947-L
6416 R2907-H 6448 R2923-H 6464 R2931-H 6496 R2947-H
6417 R2908-L 6465 R2932-L
6418 R2908-H 6466 R2932-H
6419 R2909-L 6467 R2933-L
6420 R2909-H 6468 R2933-H
6421 R2910-L 6469 R2934-L
6422 R2910-H 6470 R2934-H
6423 R2911-L
Use bit selection
parameters
#6401~#6448 freely.
6471 R2935-L
Bit selection parameter
#6449~#6496 are PLC
operation selection
parameters used by the
machine manufacturer
and MITSUBISHI. The
contents are fixed.
6424 R2911-H 6472 R2935-H
6425 R2912-L 6473 R2936-L
6426 R2912-H 6474 R2936-H
6427 R2913-L 6475 R2937-L
6428 R2913-H 6476 R2937-H
6429 R2914-L 6477 R2938-L
6430 R2914-H 6478 R2938-H
6431 R2915-L 6479 R2939-L
6432 R2915-H 6480 R2939-H