Filter
Top Products
10. PLC Help Function
- 264 -
10.3.2 Explanation of Operation
To turn on or off a switch, set the number of the switch to be turned on or off in the parentheses
of
setting part # ( ) and press the
INPUT
CALC
key.
Depending on the state of the switch, its input device X is turned on (off) and accordingly the switch
mark indicates the on (off) state.
When the optional stop is to be
turned on:
Set 4 in # ( ).
#
1
2
3
4
5
6
9
10
11
12
13
14
INPUT
Press the key.
AUTO
POWER OFF
MANL
CHIP CNVR
AUTO
OPTIONAL
STOP
AUTO
RESTART
BLOCK
DELETE
MANUAL
ABS
[PLC-SWITCH]
HANDLEIT
PROGRAM
RESTART
CHIP CNVR
The switch can be turned off (on) the same way.
Special relay SM can reverse the switch on/off states. When special relay SM is activated, the
on/off state of the corresponding switch and device X is reversed.
To display the switch validity state, etc., the switch name can be highlighted. To do this, turn on or
off output device Y corresponding to the switch name.
The corresponding table of the switch numbers, input device X, output device Y, and special relay
SM is listed below:
Corresponding
device
Corresponding
device
Switch
No.
X Y E
Switch
No.
E Y E
#1 X140 Y160 SM80 #17 X150 Y170 SM96
#2 X141 Y161 SM81 #18 X151 Y171 SM97
#3 X142 Y162 SM82 #19 X152 Y172 SM98
#4 X143 Y163 SM83 #20 X153 Y173 SM99
#5 X144 Y164 SM84 #21 X154 Y174 SM100
#6 X145 Y165 SM85 #22 X155 Y175 SM101
#7 X146 Y166 SM86 #23 X156 Y176 SM102
#8 X147 Y167 SM87 #24 X157 Y177 SM103
#9 X148 Y168 SM88 #25 X158 Y178 SM104
#10 X149 Y169 SM89 #26 X159 Y179 SM105
#11 X14A Y16A SM90 #27 X15A Y17A SM106
#12 X14B Y16B SM91 #28 X15B Y17B SM107
#13 X14C Y16C SM92 #29 X15C Y17C SM108
#14 X14D Y16D SM93 #30 X15D Y17D SM109
#15 X14E Y16E SM94 #31 X15E Y17E SM110
#16 X14F Y16F SM95 #32 X15F Y17F SM111
(Note 1)
Input device X also holds the state if power is
turned off.