Filter
Top Products
Reference Manual
IP2030/RM, Rev AA
Section 4: Getting started
June 2014
Section 4: Getting started36
The basics about the menu navigation
In this chapter and throughout this manual, a simple notation has been used to guide you to a
particular menu screen or parameter screen. This avoids the need for detailed navigation
instructions.
Consider the navigation instructions to be followed before arriving at the ADVANCED menu.
For the purpose of this example, the starting point is the Full PV Display.
In the notation form, this is simply:
1. Navigate to MAIN MENU / ADVANCED
Without the notation, this translates into these instructions:
1. Press the red (ENTER) button to display the MAIN MENU screen.
2. Press the DOWN-ARROW button three times until ADVANCED is highlighted and
blinking.
3. Press the red (ENTER) button once.
If square brackets are used in the notation, e.g. MAIN MENU / SETUP / [CONTROL UNIT], it
signifies that the bracketed menu does not appear in all circumstances.
When HART transmitters are not being used, the SELECT INSTRUMENT screen does not appear.
As there is no need to select the control unit menu or a HART transmitter (Tx1 or Tx2) menu, the
menus that appear after selecting MAIN MENU / SETUP are purely for the control unit.
Figure 4-11. Navigating to the ADVANCED menu
MAIN MENU
Run App?
MONITOR
ADVANCED
ADVANCED
Dxxx
Pxxx
x3