Filter
Top Products
31
Reference Manual
IP2030/RM, Rev AA
Section 4: Getting started
June 2014
Section 4: Getting started
Figure 4-5. How to enter the menu system
A. Large PV display.
B. Full display showing PV in normal size characters and other information.
Figure 4-6. MAIN MENU overview
A. Toggles the operating mode of the control unit. An open padlock indicates that Program mode is selected and
parameter values can be changed.
B. Selecting Controller: ****leads to the SETUP menu for setting up the control unit for an application.
C. Selecting Tx1: **** leads to the SETUP menu for adjusting the HART transmitter Tx1 operation (and similarly for Tx2
on the Mobrey MCU902). The Transmitter Bottom Reference for Tx1 (and similarly for Tx2) can be changed here.
D. Selecting Controller: **** leads to menus for viewing live readings and diagnostic information for the control unit.
E. Selecting Tx1: **** leads to menus for viewing live readings and diagnostic information from the HART transmitter
Tx1 (and similarly for Tx2 on the Mobrey MCU902).
F. Advanced access menu for advanced users to directly select parameter screens when the parameter number is
known. For a guide to this, see Appendix D Additional Features.
1.572m
1.572m
12:47
1
MAIN MENU
Run App?
MONITOR
SETUP
1
A
B
MAIN MENU
Run App?
MONITOR
SETUP
SELECT INSTRUMENT
Tx1: ****
Tx2: ****
Controller : ****
MAIN MENU
Run App?
MONITOR
Advanced
SELECT INSTRUMENT
Tx1: ****
Tx2: ****
Controller : ****
ADVANCED
Dxxx
Pxxx
1
1
1
1
1
=
Run App?
=Yes
1
Esc=No
Program?
=Yes
Esc=No
1
Note A
Note B
Note C
Note D
Note E
Note F
or