125
Reference Manual
IP2030/RM, Rev AA
Appendix C: Menus and Parameters
June 2014
Appendix C: Menus and Parameters
Appendix C Menus and Parameters
C.1 Menus and parameters
This chapter contains the full menu system maps for:
Mobrey MCU900 Series control units – see Table C-1 on page 126
Generic HART 4, 6, and 7 transmitters – see Table C-2 on page 132
Note
If a Mobrey MSP Series transmitter is connected, refer to the reference manual on the
Mobrey brand pages at www.emersonprocess.com for full information about
programming the transmitter parameters (e.g. Transmitter Bottom Reference) using
the MCU900 Series control unit or other HART-based devices.