Filter
Top Products
109
Reference Manual
IP2030/RM, Rev AA
Section 5: Servicing and Health Checking
June 2014
Section 5: Servicing and Health Checks
Figure 5-2. How to replace the fuse on a mains-powered panel-mount control unit
Carefully turn the flat-bladed screwdriver
anti-clockwise, until the fuse-holder is released.
Lift the fuse-holder away
from the control unit.
Pull the old fuse out from the fuse-holder.
Push the new fuse into the fuse-holder.
Carefully place the fuse-holder back,
noting the angled position of the notch.
Push the fuse-holder inwards, and then twist
clock-wise until the fuse-holder stays in position.