Filter
Top Products
141
Reference Manual
IP2030/RM, Rev AA
Appendix E: Support for HART
®
Transmitters
June 2014
Appendix E: Support for HART Transmitters
#18 Write tag, descriptor, date.
#19 Write final assembly number.
#20 Read long tag.
#22 Write long tag.
#31 Indicates extended command number in data field.
#38 Reset configuration changed flag.
#48 Read additional device status.
Common practice commands
#33 Read device variables.
#34 Write primary variable damping value.
#35 Write primary variable range values.
#36 Set primary variable upper range value.
#37 Set primary variable lower range value.
#40 Enter/exit fixed current mode.
#41 Perform self test.
#42 Perform device reset.
#43 Set primary variable zero.
#44 Write primary variable units.
#45 Trim loop current zero.
#46 Trim loop current gain.
#47 Write primary variable transfer function.
#50 Read dynamic variable assignments.
#51 Write dynamic variable assignments.
#59 Write number of response preambles.
#71 Lock device.
#72 Squawk.
#76 Read lock device status.
#79 Write device variable.
#89 Set real-time clock.
#90 Read real-tine clock.
#95 Read device communication statistics.
#107 Flush delayed responses.
#109 Burst mode control.