Filter
Top Products
35
Reference Manual
IP2030/RM, Rev AA
Section 4: Getting started
June 2014
Section 4: Getting started
b. Press the UP-ARROW button once to change the “0” to a “1”.
(The DOWN-ARROW can be used to cycle backwards through the digits and decimal point).
6. Press the red (ENTER) button to save the new date and return to View Mode.
(Note that on display line 4, “Save” has changed back to “Edit”).
7. Press the Esc button to return to the SETTINGS menu.
Figure 4-9. Navigation to the calendar date screen
A. This is the SETUP menu for the control unit – see Figure 4-6 on page 31 for how to get here.
Figure 4-10. Example of editing the calendar date
A. When entering any parameter screen, it is in View Mode. Help with what can be done next is on display line 4.
B. Parameter is in Edit Mode. In this mode, pressing Esc button restores the original setting and returns to View Mode.
C. The UP-ARROW button is used to scroll up through the numbers and decimal point, and the DOWN-ARROW button
scrolls down through the numbers and decimal point.
D. Parameter has returned to View Mode.
SETUP
INPUT CHANNEL
DIGITAL INPUT
SYSTEM
SYSTEM
TEST
DEFAULTS
SETTINGS
SETTINGS
Time
Date Format
Date
Date P730
30/01/14dmy
Esc=Quit =Edit
x5
Note A
Date P
30/01/14dmy
Quit
=
730
Esc= Edit
Date P
30/01/14dmy
Quit
=
730
Esc= Save
Date P
31/01/14dmy
Quit
=
730
Esc= Save
3
1
Date P
31/01/14dmy
Quit
=
730
Esc= Edit
Note A
Note B
Note D
Note C