Filter
Top Products
Reference Manual
IP2030/RM, Rev AA
Section 4: Getting started
June 2014
Section 4: Getting started34
Figure 4-8. Example of editing a numerical value
A. When entering any parameter screen, it is in View Mode. Help with what can be done next is on display line 4.
B. Parameter is in Edit Mode. In this mode, pressing Esc button restores the original setting and returns to View Mode.
C. The UP-ARROW button is used to scroll up through the numbers and decimal point, and the DOWN-ARROW button
scrolls down through the numbers and decimal point.
D. Parameter has returned to View Mode.
How to edit the calendar date parameter
1. Navigate to the Date parameter screen (see Figure 4-9 on page 35).
2. When entering any parameter screen, it is in View Mode (Figure 4-10 on page 35).
Help with what can be done next is on display line 4.
(In View Mode, the Esc button is used to leave (quit) the parameter screen.
The SETTINGS menu then re-appears, as seen before selecting the parameter screen).
3. To enter Edit Mode, press the red (ENTER) button.
4. The “3” is highlighted to show this digit can now be edited (Figure 4-10).
(Also, note that on display line 4, “Edit” has changed to be “Save”).
5. Change the calendar date from “30/01/14” to “31/01/14”:
a. Press the RIGHT-ARROW button once to move right one space and highlight the “0”.
(The LEFT-ARROW can be used to move the highlight back one space).
Up Range Val P401
12.000 m
Esc=Quit =Save
+
Up Range Val P401
+12.000 m
Esc=Quit =Save
1
Up Range Val P401
12.000 m
Esc=Quit =Edit
Up Range Val P401
+62.000 m
Esc=Quit =Save
6
Up Range Val P401
+6..000 m
Esc=Quit =Save
Up Range Val P401
+6.5000 m
Esc=Quit =Save
.
5
Up Range Val P401
6.5000 m
Esc=Quit =Edit
Note A
Note B
Note D
Note C