Filter
Top Products
127
Reference Manual
IP2030/RM, Rev AA
Section C: Menus and Parameters
June 2014
Appendix C: Menus and Parameters
(SETUP) (OUTPUT) (RELAY) RELAY 4 P440 Relay 4 Mode - None - - 70
P441 Relay 4 ON Point As P200 0 - - 70
P442 Relay 4 OFF Point As P200 0 - - 70
P443 Relay 4 Minimum On Time mmm:ss 000:00 - - 70
P444 Relay 4 Maximum On Time mmm:ss 000:00 - - 70
P445 Relay 4 Minimum Off Time mmm:ss 000:00 - - 70
RELAY 5 P450 Relay 5 Mode - None - - 70
P451 Relay 5 ON Point As P200 0 - - 70
P452 Relay 5 OFF Point As P200 0 - - 70
P453 Relay 5 Minimum On Time mmm:ss 000:00 - - 70
P454 Relay 5 Maximum On Time mmm:ss 000:00 - - 70
P455 Relay 5 Minimum Off Time mmm:ss 000:00 - - 70
ALARM P490 Rising level alarm delay mmm:ss 000:00 - - 89
P491 Relay operations alarm limit - 0 - - 88
P492 Relay operations relay select - Disabled - - 88
P493 Relay runtime alarm limit hh:mm 00:00 - - 88
P494 Relay runtime relay select - Disabled - - 89
P495
(2)
Pump efficiency limit - 0 - - 89
P496
(2)
Pump efficiency relay select - 0 - - 89
P497 No activity delay hh:mm 00:00 - - 88
P498 No activity relay hh:mm 00:00 - - 88
OVERRIDES P499 Pump On Delay s 3 0 9 84
P270
(3)
Auto Sequence Enable - Off - - 84
P271
(3)
Auto Sequence Qualifier - 0 - - 84
P272
(3)
Pump-down Relay - 0 - - 86
P273
(3)
Pump-down Interval hh.mm 00:00 - - 86
P274
(3)
Pump-down Duration hh.mm 00:00 - - 86
P275 Energy Saving Start Time hh.mm 00:00 - - 85
P276 Energy Saving Relay Select - 0 - - 85
P277
(3)
Scum Line Prevention variance - 0 - - 85
P278
(3)
Scum Line Prevention relay - 0 - - 85
CUSTOM P250 Start On - None 0 4 86
P251 Stop On - None 0 3 86
P252 Stop If - None 0 253 86
P253 Start Time hh.mm 07:00 - - 86
P254 Interval hh.mm 01:00 - - 86
P255 Start Time #2 hh.mm 00:00 - - 86
P256 Interval #2 hh:mm 00:00 - - 86
P257 Max Retries - 10 0 250 86, 91
MAIN MENU Menu Level 2 Menu Level 3 Menu Level 4
Param
Num.
Parameter Name Units
Factory
Defaults
Min Max
Reference
Pages