Filter
Top Products
Reference Manual
IP2030/RM, Rev AA
Section 5: Servicing and Health Checking
June 2014
Section 5: Servicing and Health Checks114
Totalizer (Mobrey MCU901 only)
D828 Totalizer Totalizer
This indicates the totalizer count.
See "Set-up totalizing on the Mobrey MCU901 control unit” on page 95 for details of the
totalizing feature on the MCU901.
Totalizer (Mobrey MCU902 and MCU90F only)
D828 Totalizer 1 Totalizer
This indicates the Totalizer 1 count.
See "Set-up totalizing on the Mobrey MCU902 control unit” on page 97 for details of the
totalizing feature on the MCU902.
See "Set-up totalizing on the Mobrey MCU90F control unit” on page 99 for details of the
totalizing feature on the MCU90F.
D829 Totalizer 2 Totalizer
This displays the Totalizer 2 count.
See "Set-up totalizing on the Mobrey MCU902 control unit” on page 97 for details of the
totalizing feature on the MCU902.
See "Set-up totalizing on the Mobrey MCU90F control unit” on page 99 for details of the
totalizing feature on the MCU90F.
Alarm report
D830 Alarm Report
This is for viewing live alarms.
The highest priority alarm is listed first. Use the UP/DOWN-ARROW buttons to scroll
through the list if more than one alarm exists. If there are no live alarms, the alarm
report indicates “none”.
See Table 4-8 on page 94 for a summary of other alarm reporting features.
Fault report
D831 Fault Report
This is for viewing live faults.
The highest priority fault is listed first. Use the UP/DOWN-ARROW buttons to scroll
through the list if more than one fault exists. If there are no live faults, the fault report
indicates “none”.
See Table 4-8 on page 94 for a summary of other fault reporting features.